ShapeService

Projects/Products

INNOVA58

Winning entry in a Rijkswaterstaat challenge: a printed biobased edge module in which the edge element flows into the railing.

INNOVA58

1 / 5

Rijkswaterstaat, the Dutch national roads and waterways authority, faces a vast replacement programme: thousands of bridges and viaducts. The parts that carry no structural load — edge elements, railings, rainwater drainage, cable ducts — are at present almost all made of concrete and steel. The question is whether they could be biobased instead.

A challenge was set up to find out, with InnovA58 as the test environment: the innovation strip along the A58 motorway where Rijkswaterstaat and its partners try out sustainable solutions in practice. Two entries were selected out of all the submissions. ShapeService is one of the winners.

Our design lets the edge element flow into the railing: a single continuous printed element instead of two parts that have to be assembled together. Robotic 3D printing needs no mould, so every element may differ, and recesses for services are built straight into the shape. The modules are fixed to the bridge deck with a hooked bracket and can be taken off again without damaging the structure.

The material is a plastic filled with bio-based fibres. Exactly which composition is part of the research: alongside the design, a materials track is looking at strength, weather resistance and recyclability.

The project builds on the research into printed edge elements that we carried out together with Mobilis. In October 2026, during Dutch Design Week, a full-size printed edge element was on show on the innovation strip.

The next step is the test bridge. The elements will shortly be mounted on it, and we will measure how they hold up: how strong they are and how much they expand. Ageing tests in the laboratory follow after that.

Images